Steel Angles  Unequal Legs
Dimensions and static parameters of steel angles with unequal legs  metric units.
Properties in imperial units of steel angles with unequal legs are indicated below.
For full table with Static Parameters Moment of Inertia and Section Modulus  rotate the screen!
Size (mm x mm)  Dimensions  Static Parameters  

Moment of Inertia  Section Modulus  
Depth  h  (mm)  With  w  (mm)  Thickness  s  (mm)  Sectional Area (cm^{2})  Weight (kg/m)   I_{x }_{ }(cm^{4})   I_{y }_{ }(cm^{4})   S_{x }_{ }(cm^{3})   S_{y }_{ }(cm^{3})  
50 x 40  50  40  6  5.1  3.9  12.1  6.5  3.54  2.35 
50  40  5  4.3  3.3  10.3  5.6  3.00  1.99  
60 x 30  60  30  6  5.1  4.0  18.2  3.0  4.78  1.32 
60  30  5  4.3  3.3  15.6  2.6  4.04  1.12  
65 x 50  65  50  8  8.6  8.6  34.8  17.7  7.93  4.9 
65  50  6  6.6  6.6  27.2  14.0  6.10  3.8  
65  50  5  5.5  5.5  23.2  11.9  5.14  3.2  
75 x 50  75  50  10  11.6  11.6  64  22.2  12.8  6.1 
75  50  8  9.4  9.4  52  18.4  10.4  4.9  
75  50  6  7.2  7.2  41  14.4  8.0  3.8  
80 x 60  80  60  8  10.6  10.6  66  31.8  12.2  7.2 
80  60  7  9.4  9.4  59  28.4  10.7  6.3  
80  60  6  8.1  8.1  51  24.8  9.3  5.5  
100 x 65  100  65  10  15.6  15.6  154  51  23.2  10.5 
100  65  8  12.7  12.7  127  42  18.9  8.5  
100  65  7  11.2  11.2  113  38  16.6  7.5  
100 x 75  100  75  12  19.7  19.7  189  90  28.0  16.5 
100  75  10  16.6  16.6  162  78  23.8  14.0  
100  75  8  13.5  13.5  133  64  19.3  11.4  
125 x 75  125  75  12  22.7  22.7  354  96  43.2  16.9 
125  75  10  19.1  19.1  302  82  36.5  14.3  
125  75  8  15.5  15.5  247  68  29.6  11.6  
150 x 75  150  75  15  31.6  31.6  713  120  75  21.0 
150  75  12  25.7  25.7  589  100  61  17.2  
150  75  10  21.6  21.6  501  86  52  14.6  
150 x 90  150  90  15  33.9  33.9  761  205  78  30.4 
150  90  12  27.5  27.5  927  171  63  24.8  
150  90  10  23.2  23.2  533  146  53  21.0  
200 x 100  200  100  15  43  43  1758  299  137  38.4 
200  100  12  34.8  34.8  1440  247  111  31.3  
200  100  10  29.2  29.2  1220  210  93  26.3  
200 x 150  200  150  18  60.0  60  2376  1146  174  103 
200  150  15  50.5  50.5  2022  976  147  87  
200  150  12  40.8  40.8  1652  803  119  71 
 1 in = 25.4 mm
 1 cm^{4} = 10^{8} m = 10^{4} mm
 1 in^{4} = 4.16x10^{5} mm^{4} = 41.6 cm^{4}
 1 cm^{3} = 10^{6} m^{3} = 10^{3} mm^{3}
Related Topics

Beams and Columns
Deflection and stress in beams and columns, moment of inertia, section modulus and technical information.
Related Documents

American Standard Beams  S Beam
American Standard Beams ASTM A6  Imperial units. 
American Standard Steel C Channels
Dimensions and static parameters of American Standard Steel C Channels 
American Wide Flange Beams
American Wide Flange Beams ASTM A6 in metric units. 
Angle Calculator  Carpenter's Square
Calculate angles with a straight board across carpenter's square. 
Area Moment of Inertia  Typical Cross Sections I
Typical cross sections and their Area Moment of Inertia. 
Beam Loads  Support Force Calculator
Calculate beam load and supporting forces. 
Beams  Fixed at Both Ends  Continuous and Point Loads
Stress, deflections and supporting loads. 
Beams  Fixed at One End and Supported at the Other  Continuous and Point Loads
Supporting loads, moments and deflections. 
Beams  Supported at Both Ends  Continuous and Point Loads
Supporting loads, stress and deflections. 
British Universal Columns and Beams
Properties of British Universal Steel Columns and Beams. 
Cantilever Beams  Moments and Deflections
Maximum reaction forces, deflections and moments  single and uniform loads. 
Factors of Safety  FOS
Factors of Safety  FOS  are important in engineering designs. 
HEA Steel Beams
Properties of HEA profiled steel beams. 
Miter Saw  Calculate Sawing Angle
Calculate miter saw protractor angles for skirting and decorative mouldings work. 
Modulus of Rigidity
Shear Modulus (Modulus of Rigidity) is the elasticity coefficient for shearing or torsion force. 
Square Hollow Structural Sections  HSS
Weight, cross sectional area, moments of inertia  Imperial units 
Steel Angles  Equal Legs
Dimensions and static parameters of steel angles with equal legs  imperial units. 
Steel Angles  Unequal Legs
Dimensions and static parameters of steel angles with unequal legs  imperial units. 
WBeams  American Wide Flange Beams
Dimensions of American Wide Flange Beams ASTM A6 (or WBeams)  Imperial units. 
Young's Modulus, Tensile Strength and Yield Strength Values for some Materials
Young's Modulus (or Tensile Modulus alt. Modulus of Elasticity) and Ultimate Tensile Strength and Yield Strength for materials like steel, glass, wood and many more.