Engineering ToolBox - Resources, Tools and Basic Information for Engineering and Design of Technical Applications!

This is an AMP page - Open full page! for all features.

Inches vs. mm - Conversion Chart

Sponsored Links

How many millimeters in an inch?

  • 1 inch (in) = 25.4 millimeter (mm)
  • 1 millimeter (mm) = 0.0393700787 inch (in)



Fractional Inches to Decimal Inches and Metric Millimeters

The table below can be used to convert between fractional and/or decimal inches and metric millimeters.

Convert between fractional and/or decimal inches and metric millimeters
InchesMetric
Fractional Decimal mm
. 0.0039 0.1000
. 0.0079 0.2000
. 0.0118 0.3000
1/64 0.0156 0.3969
. 0.0157 0.4000
. 0.0197 0.5000
. 0.0236 0.6000
. 0.0276 0.7000
1/32 0.0313 0.7938
. 0.0315 0.8000
. 0.0354 0.9000
. 0.0394 1.0000
. 0.0433 1.1000
3/64 0.0469 1.1906
. 0.0472 1.2000
. 0.0512 1.3000
. 0.0551 1.4000
. 0.0591 1.5000
1/16 0.0625 1.5875
. 0.0630 1.6000
. 0.0669 1.7000
. 0.0709 1.8000
. 0.0748 1.9000
5/64 0.0781 1.9844
. 0.0787 2.0000
. 0.0827 2.1000
. 0.0866 2.2000
. 0.0906 2.3000
3/32 0.0938 2.3813
. 0.0945 2.4000
. 0.0984 2.5000
7/64 0.1094 2.7781
. 0.1181 3.0000
1/8 0.1250 3.1750
. 0.1378 3.5000
9/64 0.1406 3.5719
5/32 0.1563 3.9688
. 0.1575 4.0000
11/64 0.1719 4.3656
. 0.1772 4.5000
3/16 0.1875 4.7625
. 0.1969 5.0000
13/64 0.2031 5.1594
. 0.2165 5.5000
7/32 0.2188 5.5563
15/64 0.2344 5.9531
. 0.2362 6.0000
1/4 0.2500 6.3500
. 0.2559 6.5000
17/64 0.2656 6.7469
. 0.2756 7.0000
9/32 0.2813 7.1438
. 0.2953 7.5000
19/64 0.2969 7.5406
5/16 0.3125 7.9375
. 0.3150 8.0000
21/64 0.3281 8.3344
. 0.3346 8.5000
11/32 0.3438 8.7313
. 0.3543 9.0000
23/64 0.3594 9.1281
. 0.3740 9.5000
3/8 0.3750 9.5250
25/64 0.3906 9.9219
. 0.3937 10.0000
13/32 0.4063 10.3188
. 0.4134 10.5000
27/64 0.4219 10.7156
. 0.4331 11.0000
7/16 0.4375 11.1125
. 0.4528 11.5000
29/64 0.4531 11.5094
15/32 0.4688 11.9063
. 0.4724 12.0000
31/64 0.4844 12.3031
. 0.4921 12.5000
1/2 0.5000 12.7000
. 0.5118 13.0000
33/64 0.5156 13.0969
17/32 0.5313 13.4938
. 0.5315 13.5000
35/64 0.5469 13.8906
. 0.5512 14.0000
9/16 0.5625 14.2875
. 0.5709 14.5000
37/64 0.5781 14.6844
. 0.5906 15.0000
19/32 0.5938 15.0813
39/64 0.6094 15.4781
. 0.6102 15.5000
5/8 0.6250 15.8750
. 0.6299 16.0000
41/64 0.6406 16.2719
. 0.6496 16.5000
21/32 0.6563 16.6688
. 0.6693 17.0000
43/64 0.6719 17.0656
11/16 0.6875 17.4625
. 0.6890 17.5000
45/64 0.7031 17.8594
. 0.7087 18.0000
23/32 0.7188 18.2563
. 0.7283 18.5000
47/64 0.7344 18.6531
. 0.7480 19.0000
3/4 0.7500 19.0500
49/64 0.7656 19.4469
. 0.7677 19.5000
25/32 0.7813 19.8438
. 0.7874 20.0000
51/64 0.7969 20.2406
. 0.8071 20.5000
13/16 0.8125 20.6375
. 0.8268 21.0000
53/64 0.8281 21.0344
27/32 0.8438 21.4313
. 0.8465 21.5000
55/64 0.8594 21.8281
. 0.8661 22.0000
7/8 0.8750 22.2250
. 0.8858 22.5000
57/64 0.89063 22.6219
. 0.9055 23.0000
29/32 0.90625 23.0188
59/64 0.92188 23.4156
. 0.9252 23.5000
15/16 0.93750 23.8125
. 0.9449 24.0000
61/64 0.95313 24.2094
. 0.9646 24.5000
31/32 0.96875 24.6063
. 0.9843 25.0000
63/64 0.98438 25.0031
1 1.000 25.40
. 1.0039 25.5000
. 1.0236 26.0000
. 1.0433 26.5000
. 1.0630 27.0000
. 1.0827 27.5000
. 1.1024 28.0000
. 1.1220 28.5000
. 1.1417 29.0000
. 1.1614 29.5000
. 1.1811 30.0000
. 1.2205 31.0000
1 1/4 1.2500 31.7500
. 1.2598 32.0000
. 1.2992 33.0000
. 1.3386 34.0000
. 1.3780 35.0000
. 1.4173 36.0000
. 1.4567 37.0000
. 1.4961 38.0000
1 1/2 1.5000 38.1000
. 1.5354 39.0000
. 1.5748 40.0000
. 1.6142 41.0000
. 1.6535 42.0000
. 1.6929 43.0000
. 1.7323 44.0000
1 3/4 1.7500 44.4500
. 1.7717 45.0000
. 1.8110 46.0000
. 1.8504 47.0000
. 1.8898 48.0000
. 1.9291 49.0000
. 1.9685 50.0000
2 2.0000 50.8000
. 2.0079 51.0000
. 2.0472 52.0000
. 2.0866 53.0000
. 2.1260 54.0000
. 2.1654 55.0000
. 2.2047 56.0000
. 2.2441 57.0000
2 1/4 2.2500 57.1500
. 2.2835 58.0000
. 2.3228 59.0000
. 2.3622 60.0000
. 2.4016 61.0000
. 2.4409 62.0000
. 2.4803 63.0000
2 1/2 2.5000 63.5000
. 2.5197 64.0000
. 2.5591 65.0000
. 2.5984 66.0000
. 2.6378 67.0000
. 2.6772 68.0000
. 2.7165 69.0000
2 3/4 2.7500 69.8500
. 2.7559 70.0000
. 2.7953 71.0000
. 2.8346 72.0000
. 2.8740 73.0000
. 2.9134 74.0000
. 2.9528 75.0000
. 2.9921 76.0000
3 3.0000 76.2000
. 3.0315 77.0000
. 3.0709 78.0000
. 3.1102 79.0000
. 3.1496 80.0000
. 3.1890 81.0000
. 3.2283 82.0000
. 3.2677 83.0000
. 3.3071 84.0000
. 3.3465 85.0000
. 3.3858 86.0000
. 3.4252 87.0000
. 3.4646 88.0000
3 1/2 3.5000 88.9000
. 3.5039 89.0000
. 3.5433 90.0000
. 3.5827 91.0000
. 3.6220 92.0000
. 3.6614 93.0000
. 3.7008 94.0000
. 3.7402 95.0000
. 3.7795 96.0000
. 3.8189 97.0000
. 3.8583 98.0000
. 3.8976 99.0000
. 3.9370 100.0000
4 4.0000 101.6000
. 4.3307 110.0000
4 1/2 4.5000 114.3000
. 4.7244 120.0000
5 5.0000 127.0000
. 5.1181 130.0000
. 5.5118 140.0000
. 5.9055 150.0000
6 6.0000 152.4000
. 6.2992 160.0000
. 6.6929 170.0000
. 7.0866 180.0000
. 7.4803 190.0000
. 7.8740 200.0000
8 8.0000 203.2000
. 9.8425 250.0000
10 10.0000 254.0000
20 20.0000 508.0000
30 30.0000 762.0000
40 40.0000 1016.000
60 60.0000 1524.000
80 80.0000 2032.000
100 100.0000 2540.000

mm to Inches Chart

Inches to mm Converter

Download and print inches to mm chart

Decimal Inches to mm

Convert from decimal inches to mm
inches mm
0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09
0.00 0.00 0.25 0.51 0.76 1.02 1.27 1.52 1.78 2.03 2.29
0.10 2.54 2.79 3.05 3.30 3.56 3.81 4.06 4.32 4.57 4.83
0.20 5.08 5.33 5.59 5.84 6.10 6.35 6.60 6.86 7.11 7.37
0.30 7.62 7.87 8.13 8.38 8.64 8.89 9.14 9.40 9.65 9.91
0.40 10.16 10.41 10.67 10.92 11.18 11.43 11.68 11.94 12.19 12.45
0.50 12.70 12.95 13.21 13.46 13.72 13.97 14.22 14.48 14.73 14.99
0.60 15.24 15.49 15.75 16.00 16.26 16.51 16.76 17.02 17.27 17.53
0.70 17.78 18.03 18.29 18.54 18.80 19.05 19.30 19.56 19.81 20.07
0.80 20.32 20.57 20.83 21.08 21.34 21.59 21.84 22.10 22.35 22.61
0.90

mm to Decimal Inches

Convert from mm to decimal inches
mm inches
0 1 2 3 4 5 6 7 8 9
0 0.0000 0.0394 0.0787 0.118 0.157 0.197 0.236 0.276 0.315 0.354
10 0.394 0.433 0.472 0.512 0.551 0.591 0.630 0.669 0.709 0.748
20 0.787 0.827 0.866 0.906 0.945 0.984 1.02 1.06 1.10 1.14
30 1.18 1.22 1.26 1.30 1.34 1.38 1.42 1.46 1.50 1.54
40 1.57 1.61 1.65 1.69 1.73 1.77 1.81 1.85 1.89 1.93
50 1.97 2.01 2.05 2.09 2.13 2.17 2.20 2.24 2.28 2.32
60 2.36 2.40 2.44 2.48 2.52 2.56 2.60 2.64 2.68 2.72
70 2.76 2.80 2.83 2.87 2.91 2.95 2.99 3.03 3.07 3.11
80 3.15 3.19 3.23 3.27 3.31 3.35 3.39 3.43 3.46 3.50
90 3.54 3.58 3.62 3.66 3.70 3.74 3.78 3.82 3.86 3.90
100 3.94 3.98 4.02 4.06 4.09 4.13 4.17 4.21 4.25 4.29
110 4.33 4.37 4.41 4.45 4.49 4.53 4.57 4.61 4.65 4.69
120 4.72 4.76 4.80 4.84 4.88 4.92 4.96 5.00 5.04 5.08
130 5.12 5.16 5.20 5.24 5.28 5.31 5.35 5.39 5.43 5.47
140 5.51 5.55 5.59 5.63 5.67 5.71 5.75 5.79 5.83 5.87
150 5.91 5.94 5.98 6.02 6.06 6.10 6.14 6.18 6.22 6.26
160 6.30 6.34 6.38 6.42 6.46 6.50 6.54 6.57 6.61 6.65
170 6.69 6.73 6.77 6.81 6.85 6.89 6.93 6.97 7.01 7.05
180 7.09 7.13 7.17 7.20 7.24 7.28 7.32 7.36 7.40 7.44
190 7.48 7.52 7.56 7.60 7.64 7.68 7.72 7.76 7.80 7.83
200 7.87 7.91 7.95 7.99 8.03 8.07 8.11 8.15 8.19 8.23
210 8.27 8.31 8.35 8.39 8.43 8.46 8.50 8.54 8.58 8.62
220 8.66 8.70 8.74 8.78 8.82 8.86 8.90 8.94 8.98 9.02
230 9.06 9.09 9.13 9.17 9.21 9.25 9.29 9.33 9.37 9.41
240 9.45 9.49 9.53 9.57 9.61 9.65 9.69 9.72 9.76 9.80
250 9.84 9.88 9.92 9.96 10.0 10.0 10.1 10.1 10.2 10.2
260 10.2 10.3 10.3 10.4 10.4 10.4 10.5 10.5 10.6 10.6
270 10.6 10.7 10.7 10.7 10.8 10.8 10.9 10.9 10.9 11.0
280 11.0 11.1 11.1 11.1 11.2 11.2 11.3 11.3 11.3 11.4
290 11.4 11.5 11.5 11.5 11.6 11.6 11.7 11.7 11.7 11.8
300 11.8 11.9 11.9 11.9 12.0 12.0 12.0 12.1 12.1 12.2
310 12.2 12.2 12.3 12.3 12.4 12.4 12.4 12.5 12.5 12.6
320 12.6 12.6 12.7 12.7 12.8 12.8 12.8 12.9 12.9 13.0
330 13.0 13.0 13.1 13.1 13.1 13.2 13.2 13.3 13.3 13.3
340 13.4 13.4 13.5 13.5 13.5 13.6 13.6 13.7 13.7 13.7
350 13.8 13.8 13.9 13.9 13.9 14.0 14.0 14.1 14.1 14.1
360 14.2 14.2 14.3 14.3 14.3 14.4 14.4 14.4 14.5 14.5
370 14.6 14.6 14.6 14.7 14.7 14.8 14.8 14.8 14.9 14.9
380 15.0 15.0 15.0 15.1 15.1 15.2 15.2 15.2 15.3 15.3
390 15.4 15.4 15.4 15.5 15.5 15.6 15.6 15.6 15.7 15.7
400 15.7 15.8 15.8 15.9 15.9 15.9 16.0 16.0 16.1 16.1
410 16.1 16.2 16.2 16.3 16.3 16.3 16.4 16.4 16.5 16.5
420 16.5 16.6 16.6 16.7 16.7 16.7 16.8 16.8 16.9 16.9
430 16.9 17.0 17.0 17.0 17.1 17.1 17.2 17.2 17.2 17.3
440 17.3 17.4 17.4 17.4 17.5 17.5 17.6 17.6 17.6 17.7
450 17.7 17.8 17.8 17.8 17.9 17.9 18.0 18.0 18.0 18.1
460 18.1 18.1 18.2 18.2 18.3 18.3 18.3 18.4 18.4 18.5
470 18.5 18.5 18.6 18.6 18.7 18.7 18.7 18.8 18.8 18.9
480 18.9 18.9 19.0 19.0 19.1 19.1 19.1 19.2 19.2 19.3
490 19.3 19.3 19.4 19.4 19.4 19.5 19.5 19.6 19.6 19.6
500 19.7 19.7 19.8 19.8 19.8 19.9 19.9 20.0 20.0 20.0
510 20.1 20.1 20.2 20.2 20.2 20.3 20.3 20.4 20.4 20.4
520 20.5 20.5 20.6 20.6 20.6 20.7 20.7 20.7 20.8 20.8
530 20.9 20.9 20.9 21.0 21.0 21.1 21.1 21.1 21.2 21.2
540 21.3 21.3 21.3 21.4 21.4 21.5 21.5 21.5 21.6 21.6
550 21.7 21.7 21.7 21.8 21.8 21.9 21.9 21.9 22.0 22.0
560 22.0 22.1 22.1 22.2 22.2 22.2 22.3 22.3 22.4 22.4
570 22.4 22.5 22.5 22.6 22.6 22.6 22.7 22.7 22.8 22.8
580 22.8 22.9 22.9 23.0 23.0 23.0 23.1 23.1 23.1 23.2
590 23.2 23.3 23.3 23.3 23.4 23.4 23.5 23.5 23.5 23.6
600 23.6 23.7 23.7 23.7 23.8 23.8 23.9 23.9 23.9 24.0
610 24.0 24.1 24.1 24.1 24.2 24.2 24.3 24.3 24.3 24.4
620 24.4 24.4 24.5 24.5 24.6 24.6 24.6 24.7 24.7 24.8
630 24.8 24.8 24.9 24.9 25.0 25.0 25.0 25.1 25.1 25.2
640 25.2 25.2 25.3 25.3 25.4 25.4 25.4 25.5 25.5 25.6
650 25.6 25.6 25.7 25.7 25.7 25.8 25.8 25.9 25.9 25.9
660 26.0 26.0 26.1 26.1 26.1 26.2 26.2 26.3 26.3 26.3
670 26.4 26.4 26.5 26.5 26.5 26.6 26.6 26.7 26.7 26.7
680 26.8 26.8 26.9 26.9 26.9 27.0 27.0 27.0 27.1 27.1
690 27.2 27.2 27.2 27.3 27.3 27.4 27.4 27.4 27.5 27.5
700 27.6 27.6 27.6 27.7 27.7 27.8 27.8 27.8 27.9 27.9
710 28.0 28.0 28.0 28.1 28.1 28.1 28.2 28.2 28.3 28.3
720 28.3 28.4 28.4 28.5 28.5 28.5 28.6 28.6 28.7 28.7
730 28.7 28.8 28.8 28.9 28.9 28.9 29.0 29.0 29.1 29.1
740 29.1 29.2 29.2 29.3 29.3 29.3 29.4 29.4 29.4 29.5
750 29.5 29.6 29.6 29.6 29.7 29.7 29.8 29.8 29.8 29.9
760 29.9 30.0 30.0 30.0 30.1 30.1 30.2 30.2 30.2 30.3
770 30.3 30.4 30.4 30.4 30.5 30.5 30.6 30.6 30.6 30.7
780 30.7 30.7 30.8 30.8 30.9 30.9 30.9 31.0 31.0 31.1
790 31.1 31.1 31.2 31.2 31.3 31.3 31.3 31.4 31.4 31.5
800 31.5 31.5 31.6 31.6 31.7 31.7 31.7 31.8 31.8 31.9
810 31.9 31.9 32.0 32.0 32.0 32.1 32.1 32.2 32.2 32.2
820 32.3 32.3 32.4 32.4 32.4 32.5 32.5 32.6 32.6 32.6
830 32.7 32.7 32.8 32.8 32.8 32.9 32.9 33.0 33.0 33.0
840 33.1 33.1 33.1 33.2 33.2 33.3 33.3 33.3 33.4 33.4
850 33.5 33.5 33.5 33.6 33.6 33.7 33.7 33.7 33.8 33.8
860 33.9 33.9 33.9 34.0 34.0 34.1 34.1 34.1 34.2 34.2
870 34.3 34.3 34.3 34.4 34.4 34.4 34.5 34.5 34.6 34.6
880 34.6 34.7 34.7 34.8 34.8 34.8 34.9 34.9 35.0 35.0
890 35.0 35.1 35.1 35.2 35.2 35.2 35.3 35.3 35.4 35.4
900 35.4 35.5 35.5 35.6 35.6 35.6 35.7 35.7 35.7 35.8
910 35.8 35.9 35.9 35.9 36.0 36.0 36.1 36.1 36.1 36.2
920 36.2 36.3 36.3 36.3 36.4 36.4 36.5 36.5 36.5 36.6
930 36.6 36.7 36.7 36.7 36.8 36.8 36.9 36.9 36.9 37.0
940 37.0 37.0 37.1 37.1 37.2 37.2 37.2 37.3 37.3 37.4
950 37.4 37.4 37.5 37.5 37.6 37.6 37.6 37.7 37.7 37.8
960 37.8 37.8 37.9 37.9 38.0 38.0 38.0 38.1 38.1 38.1
970 38.2 38.2 38.3 38.3 38.3 38.4 38.4 38.5 38.5 38.5
980 38.6 38.6 38.7 38.7 38.7 38.8 38.8 38.9 38.9 38.9
990 39.0 39.0 39.1 39.1 39.1 39.2 39.2 39.3 39.3 39.3
1000 39.4 39.4 39.4 39.5 39.5 39.6 39.6 39.6 39.7 39.7
Sponsored Links

Related Topics

Basics

Basic engineering data. SI-system, unit converters, physical constants, drawing scales and more.

Related Documents

Feet vs. Inches Converting Chart

Convert from feet and inches to inches.

Fractions and Decimal Inches Equivalents

The inches fractional and decimal equivalents.

Inches - Fractional vs. Decimal Equivalents

The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch.

Inches vs. Feet, Yards and Meters - Conversion Chart

Convert between inches, feet, yards and meters.

Length - Online Unit Converter

Convert between length units like meters, feet, inches, nautical miles and more.

Pipes - Fractional Equivalents

Fractional vs. decimal inches.

Sponsored Links

Search Engineering ToolBox

  • the most efficient way to navigate the Engineering ToolBox!

SketchUp Extension - Online 3D modeling!

Add standard and customized parametric components - like flange beams, lumbers, piping, stairs and more - to your Sketchup model with the Engineering ToolBox - SketchUp Extension - enabled for use with the amazing, fun and free SketchUp Make and SketchUp Pro . Add the Engineering ToolBox extension to your SketchUp from the Sketchup Extension Warehouse!

Privacy

We don't collect information from our users. Only emails and answers are saved in our archive. Cookies are only used in the browser to improve user experience.

Some of our calculators and applications let you save application data to your local computer. These applications will - due to browser restrictions - send data between your browser and our server. We don't save this data.

Google use cookies for serving our ads and handling visitor statistics. Please read Google Privacy & Terms for more information about how you can control adserving and the information collected.

AddThis use cookies for handling links to social media. Please read AddThis Privacy for more information.