US Machine Screws - Dimensions
Machine screw diameters.
| Size no. | Thread Diameter | TPI | ||
|---|---|---|---|---|
| Decimal (in) | Nearest Fractional (in) | Fine | Coarse | |
| 0 | 0.0600 | 1/16 | 80 | |
| 1 | 0.0730 | 5/64 | 72 | 64 |
| 2 | 0.0860 | 3/32 | 64 | 56 |
| 3 | 0.0990 | 7/64 | 56 | 48 |
| 4 | 0.1120 | 7/64 | 48 | 40 |
| 5 | 0.1250 | 1/8 | 44 | 40 |
| 6 | 0.1380 | 9/64 | 40 | 32 |
| 8 | 0.1640 | 5/32 | 36 | 32 |
| 10 | 0.1900 | 3/16 | 32 | 24 |
| 12 | 0.2160 | 7/32 | 28 | 24 |
| 1/4 | 0.2500 | 1/4 | 28 | 20 |
| 5/16 | 0.3125 | 5/16 | 24 | 18 |
| 3/8 | 0.3750 | 3/8 | 24 | 16 |
- TPI = threads per inch
- threads according UNF – Unified National Fine Thread
Related Topics
-
Fasteners
Bolts, nuts and threaded rods - torque, tension and loads. -
Miscellaneous
Engineering related topics like Beaufort Wind Scale, CE-marking, drawing standards and more.
Related Documents
-
Metric Bolt Heads and Wrench Sizes
ANSI/SO, DIN and JIS bolts. -
Metric Steel Bolts - Grades and Property Classes
Metric steel bolts, screws and studs - proof and tensile strength. -
Reduced Torque with Lubricated Bolts
Lubrication effect on bolt tension and torque. -
Screws - Metric vs. Inches
Metric versus Imperial equivalent screw dimensions. -
UNC and UNF - Unified Coarce and Unified Fine Inch Threads
ANSI/ASME B1.1 Unified National Thread - UNC Coarse series and UNF Fine series. -
US Bolts - Head and Wrench Sizes
Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt. -
US Bolts - Tightening Torques
Recommended bolt torques. -
US Machine Screws - Dimensions
Machine screw diameters. -
US Machine Screws - Dimensions
Machine screw diameters. -
US Wood Screws - Nominal Sizes
Wood screws - nominal sizes vs. diameters. -
US Wood Screws - Pilot Holes
Hard wood and soft wood pilot holes, shank clearance holes and countersink diameters. -
Wood Screws - Withdrawal Force
Allowable withdrawal load force. -
Wrench Spanners - Inches vs. mm
Convert between US Inches and metric mm wrench and spanner sizes.
